News Delcam to show high-speed programming at TCT Delcam to launch new feature-based CAM at IMTS Delcam’s FeatureCAM gives faster programming and more efficient machining More press releases >>

Communities Delcam Forum ArtCAM Forum FeatureCAM Forum CRISPIN Forum

Case Studies

Delcam’s FeatureCAM cuts prosthetic programming times by 75%

Moving up to the five-axis machining module of Delcam’s FeatureCAM feature-based CAM system has cut programming times by up to 75% at Fillauer Companies, Inc.

More case studies >>

Downloads & Guides Exchange - CAD Translation FeatureCAM - Free Evaluation More downloads >>

Videos New features of FeatureCAM 2010 (French) New features of PowerMILL 2010 (French) Robinson Helicopters - FeatureCAM Customer Testimonial More videos at Delcam TV >>

Engineering & Machining 5 Axis Machining High Speed Machining Automated Machining Adaptive Machining Inspection Mould Making Tool Making Swiss Turn Custom Services

Transport Solutions Aerospace Automotive Composites Marine Inspection Tyres Port Machining

Plastics & Packaging Mould Making Packaging Plastics Product Design Total Modelling

Consumer Products Ceramics & Cutlery Engraving & Cabinet Making Footwear Jewellery Product Design Signmaking & Woodworking Toys

Healthcare Healthcare Dental Orthotic Insoles Orthopaedic Footwear Medical Implants Maxillofacial Prosthetics

Additional Solutions Reverse Engineering Cad Translation Collaborative Manufacturing Housing Programmes Education Rapid Prototyping PowerSHAPE-e

You are here:
Home
»
Technical Support

Support

Alert

We have discovered that some controls will behave erratically when given an arc move (G2 or G3) that has a large radius and a short arc segment. The symptom most often observed is the machine trying to cut a very large diameter arc that scraps the part. When this occurs the machine is probably going the opposite direction than is programmed, for example a G3 move is given to the machine but it moves in the G2 direction.
Click here for instructions to eliminate this problem.